Feet correction cushion BodyMap® N
BodyMap® N is a feet correction cushion which helps to improve the position of adducted or abducted feet while sitting or standing. The cushion keeps deformed feet in the required therapeutic position. It is a great product for passive rehabilitation of club feet and other deformations resulting from neurological or rheumatic conditions.
The BodyMap® N cushion can be used both in a sitting and standing position, e.g. during doing the homework in our standing frame.
The BodyMap® N cushion is laminated with high quality elastic polyester.
Optionally, at the customer’s request, the cushion can be equipped with a self-adhesive fabric, which makes it possible to attach various elements with the use of Velcro to it. Thanks to that function, stabilizing the patient or mounting the cushion in any place, e.g. in a stroller or chair, is now possible. Additionally, the self-adhesive function prevents the cushion from moving.
NOTE!
Each BodyMap® product can be custom-made.
Indications
- Bedsore prophylaxis in the feet and ankles area (mainly calcaneus)
- Ankle joint deformations (e.g. clubfoot)
- Neurogenic diseases with increased or impaired muscle tension
- Hallux valgus
- Rheumatoid foot
Key features
- Helps to put the feet in the required therapeutic position
- Corrects deformations and distortions in the feet and ankle joints area
- Shaped form lasts for a long time
- Easy to give a demanded shape
- Helps to keep a proper position
- Optional cover made of VISmemo™ thermoactive foam
- Self-adhesive function (optional)
- Waterproof
BodyMap® products are made of soft, elastic neoprene foam, which perfectly adapts to the patient’s body. With such precise mapping the contact area of the body with the cushion surface is increased, thereby the pressure is reduced. This has a very significant impact in the prevention of bedsores. Thanks to the vacuum technology, it is possible to gradually adjust the level of hardness of the product.
For patients, who use the BodyMap® cushion continuously for more than two hours, it is recommended to use the VISmemo™ thermoactive cover to minimize the risk bedsores.
For patients particularly susceptible to pressure sores, we recommend the use of BodyMap® cushions with a COTTON COVER, FLEXIBLE COVER or 3D Mesh™ COVER and Aerating-massaging pads.
With dual-function pump it is possible to adjust the hardness of the cushion to the individual needs of the patient. They allow precise pumping out of the air in order to achieve the desired hardness. Electric and manual pumps are available.
Included
Self-adhesive function – option available only when ordering
The cushion can be covered with the self-adhesive fabric at the bottom. As a result, various elements can be attached to it with the use of Velcro. This allows you to stabilize the patient in the cushion or mount it in such places as a stroller, chair or a car seat. The self-adhesive function also prevents the cushion from moving.
IMPORTANT! When purchasing the product in the standard version, it is not possible to add the self-adhesive function later.
Vacuum pump
Handy, small vacuum pump, ideal for small and medium-sized cushions.
Repair kit
A repair kit is added to each cushion, which consists of a tube of neoprene glue, a set of patches and an instruction manual.
Valve with chain
The pump valve is small and easy to lose. With the chain you will never have to search for it again.
Suggested accessories
AVAILABLE SIZES
A – Cushion width, B – Cushion length, T– Cushion thickness
*AVAILABLE WHILE STOCKS LAST
The measurements have been made after the air was pumped out and the cushion was initially shaped. The tolerance of the dimensions in the size table is +/- 2 cm. The dimensions of the product may slightly differ depending on the way it is shaped.
SEE OUR BodyMap® VACUUM SYSTEM MOVIES!
This is a medical device. Use it in accordance with the user manual or the label.