BodyMap® M cushion is an excellent product in addition to a daily rehabilitation. If your patient uses our standing frame, wheelchair or positioning chair with a table, you can mount our cushion on it and continue the therapy!
You can shape the cushion according to the patient’s needs, so you can place and maintain the hands and forearms in the required position.
Our cushion precisely corrects upper limb deformations.
The BodyMap® M cushion is laminated with high quality elastic polyester.
Optionally, at the customer’s request, the cushion can be equipped with a self-adhesive fabric at the bottom, which makes it possible to attach various elements with the use of Velcro to it. Thanks to that function, stabilizing the patient or mounting the cushion in any place, e.g. in a stroller, chair or car seat, is now possible. Additionally, the self-adhesive function prevents the cushion from moving.
Each BodyMap® product can be custom-made.
In each of the cushions there is a possibility to make utility holes of any shape and size. The holes allow eg. installation of stabilizing belts, vests, etc.
- Deformations of the hands and forearms (neurogenic, rheumatoid, muscle and joint contractures)
- Bedsore prophylaxis in the forearm, wrist and hand area
- Paresthesia resulting from intra-articular compression of the ulnar nerve (e.g. in RA)
- Painful rheumatoid nodules
- Helps to put the hands in the required therapeutic position
- Corrects deformations and distortions in the hands and wrists area
- Shaped form lasts for a long time
- Easy to give a demanded shape
- Helps to keep a proper position
- Optional cover made of VISmemo™ thermoactive foam
- Self-adhesive function (optional)
BodyMap® products are made of soft, elastic neoprene foam, which perfectly adapts to the patient’s body. With such precise mapping the contact area of the body with the cushion surface is increased, thereby the pressure is reduced. This has a very significant impact in the prevention of bedsores. Thanks to the vacuum technology, it is possible to gradually adjust the level of hardness of the product.
For patients, who use the BodyMap® cushion continuously for more than two hours, it is recommended to use the VISmemo™ thermoactive cover to minimize the risk bedsores.
For patients particularly susceptible to pressure sores, we recommend the use of BodyMap® cushions with a COTTON COVER, FLEXIBLE COVER or 3D Mesh™ COVER and Aerating-massaging pads.
With dual-function pump it is possible to adjust the hardness of the cushion to the individual needs of the patient. They allow precise pumping out of the air in order to achieve the desired hardness. Electric and manual pumps are available.
Self-adhesive function – option available only when ordering
The cushion can be covered with the self-adhesive fabric at the bottom. As a result, various elements can be attached to it with the use of Velcro. This allows you to stabilize the patient in the cushion or mount it in such places as a stroller, chair or a car seat. The self-adhesive function also prevents the cushion from moving.
IMPORTANT! When purchasing the product in the standard version, it is not possible to add the self-adhesive function later.
Handy, small vacuum pump, ideal for small and medium-sized cushions.
A repair kit is added to each cushion, which consists of a tube of neoprene glue, a set of patches and an instruction manual.
Valve with chain
The pump valve is small and easy to lose. With the chain you will never have to search for it again.
The dimensions of the cushion and the price calculated when ordering.
A – Cushion width, B – Cushion length, T– Cushion thickness
|Size||Dimensions [cm]||Available colors||Suggested accessories – catalog number|
|Thickness of neoprene|
Measurement tolerance range is +/- 2 mm.
SEE OUR BodyMap® VACUUM SYSTEM MOVIES!