Straight headrest BodyMap® DY

Straight headrest BodyMap® DY

BodyMap DYBodyMap DY

BodyMap® DY  is a straight orthopedic headrest which can be easily shaped to the patient’s head. It can be mounted on most of the wheelchairs, positioning chairs as well as standing frames.

One side of the BodyMap® DY headrest is laminated with high quality elastic polyester whereas the second one is laminated with a self-adhesive fabric which makes it possible to attach various elements with the use of Velcro to it. Thanks to that function, stabilizing the patient’s head or mounting the headrest in any place, e.g. in a stroller, chair or car seat, is now possible. Additionally, the self-adhesive function prevents the headrest from moving.

If the product is placed on a hospital bed, it is necessary to use a special bed sheet with a self-adhesive function produced by REH4MAT®.

bm7

NOTE!

Each BodyMap® product can be custom-made.

 

Indications

  • Cerebral palsy
  • Bedsore prophylaxis
  • Helps to keep the head in the correct position
  • Myotonia

Key features

  • Shaped form lasts for a long time
  • Easy to give a demanded shape
  • Possibility of mounting the headrest in a wheelchair, positioning chair, special needs stroller
  • Optional cover made of VISmemo™ thermoactive foam
  • Self-adhesive function
  • Waterproof

schemat
BodyMap®
products are made of soft, elastic neoprene foam, which perfectly adapts to the patient’s body. With such precise mapping the contact area of the body with the cushion surface is increased, thereby the pressure is reduced. This has a very significant impact in the prevention of bedsores. Thanks to the vacuum technology, it is possible to gradually adjust the level of hardness of the product.
For patients, who use the BodyMap® cushion continuously for more than two hours, it is recommended to use the VISmemo™ thermoactive cover to minimize the risk bedsores.

Dual-function pump
With a dual-function pump it is possible to adjust the hardness of the cushion to the individual needs of the patient. It allows precise pumping out of the air in order to achieve the desired hardness. Electric and manual pumps are available.

Included

Self-gripping surfaceSelf-adhesive function
The headrest is covered with a self-adhesive fabric at the bottom. As a result, various elements can be attached to it with the use of Velcro. This allows you to stabilize the patient’s head or mount the headrest in such places as a stroller, seat or a car.

Vacuum pumpVacuum pump
Handy, small vacuum pump, ideal for small and medium-sized cushions.

Repair kitRepair kit
A repair kit is added to each cushion, which consists of a tube of neoprene glue, a set of patches and an instruction manual.

Valve with chainValve with chain
The pump valve is small and easy to lose. With the chain you will never have to search for it again.

Suggested accessories

Zawór serwisowy

Service valve

Granulat

Granules

Pompka elektryczna

Electric pump

Pompka ręczna dwufunkcyjna

Manual dual-function pump

Pompka elektryczna dwufunkcyjna BM_005

Electric dual-function pump

Pokrowiec Vismemo

VISmemo cover

Cotton cover

Flexible cover

3D Mesh cover

Pas mocowania zagłówka

Fastening belt for headrest

Taśma mocowania zagłówka

Fastening tape for headrest

AVAILABLE SIZES

Sposób dokonywania pomiaru
A – Headrest width, C – Headrest height, T1 – Headrest thickness, T2 – Headrest thickness

Size Dimensions [cm] Available colors Suggested accessories – catalog number
A C T1 T2 Cotton
cover
pokrowito
VISmemo™
cover
pokrowito
Flexible
cover
pokrowito
3D Mesh™
cover
pokrowito
1 38 15 2 4 kolorito PF/BM-DY/1 PV/BM-DY/1 PEL/BM-DY/1 P3D/BM-DY/1
2 41 16 3 5 kolorito PF/BM-DY/2 PV/BM-DY/2 PEL/BM-DY/2 P3D/BM-DY/2

SEE OUR BodyMap® VACUUM SYSTEM MOVIES!