Stabilizing mattress BodyMap® K
BodyMap® K is a stabilizing mattresses which can be easily shaped to the patient’s body. Due to that quality, the BodyMap® products support every part of the patient’s body and therefore are ideal in the bedsore prophylaxis. Using them guarantees the correct positioning of the trunk, pelvis, upper and lower limbs and the head. With the BodyMap® products, the posture defects can be easily corrected.
The BodyMap® K mattress is laminated with high quality elastic polyester and is covered with a self-adhesive fabric at the sides. As a result, various elements can be attached to it with the use of Velcro. This allows you to stabilize the patient on the mattress.
Each BodyMap® product can be custom-made.
- Cerebral palsy
- Bedsore prophylaxis
- Poor position of trunk, pelvis, upper and lower limbs and the head
- Poor posture
- Excessive muscles tension (hypersthenia)
- Shaped form lasts for a long time
- Easy to give a demanded shape
- Optional cover made of VISmemo™ thermoactive foam
- Self-adhesive function (at the sides)
BodyMap® products are made of soft, elastic neoprene foam, which perfectly adapts to the patient’s body. With such precise mapping the contact area of the body with the cushion surface is increased, thereby the pressure is reduced. This has a very significant impact in the prevention of bedsores. Thanks to the vacuum technology, it is possible to gradually adjust the level of hardness of the product.
For patients, who use the BodyMap® cushion continuously for more than two hours, it is recommended to use the VISmemo™ thermoactive cover to minimize the risk bedsores.
For patients particularly susceptible to pressure sores, we recommend the use of BodyMap® cushions with a COTTON COVER , FLEXIBLE COVER or 3D Mesh™ COVER and Aerating-massaging pads.
With dual-function pump it is possible to adjust the hardness of the cushion to the individual needs of the patient. They allow precise pumping out of the air in order to achieve the desired hardness. Electric and manual pumps are available.
The mattress is covered with a self-adhesive fabric at the sides. As a result, various elements can be attached to it with the use of Velcro. This allows you to stabilize the patient on the mattress.
Large hand pump
Highly efficient manual pump. Ideal for mattresses and big cushions.
A repair kit is added to each cushion, which consists of a tube of neoprene glue, a set of patches and an instruction manual.
Valve with chain
The pump valve is small and easy to lose. With the chain you will never have to search for it again.
The valve makes it easier to increase or decrease the amount of the granules in the product depending on the individual needs.
A – Mattress width, B – Mattress length, T – Mattress thickness
The measurements have been made after the air was pumped out and the cushion was initially shaped. The tolerance of the dimensions in the size table is +/- 2 cm. The dimensions of the product may slightly differ depending on the way it is shaped.
SEE OUR BodyMap® VACUUM SYSTEM MOVIES!